Selector set

Package does not include tools for installation

We recommend using the services of an experienced gunsmith - CZ usually glues the trigger container and safety selector screws and may need to be drilled out

Installation

  1. Pull out the magazine and check the chamber of the firearm

  2. Switch the safety lever to self-loading mode and lock the cocking lever in the rear position

  3. Push the captive pin out of the lower part of the gun and separate the upper and lower receivers

  4. Unscrew the set screw of the right-hand safety selector and slide the switch assembly out of the trigger container

  5. Unscrew the set screw of the left selector lever and insert the new selector/delete

  6. Secure the left selector/delete with the stainless steel set screw - tighten until you feel a slight resistance

  7. The new set screw should not stick out of the switch body

  8. Slide the switch assembly back into the trigger container and fit the right-hand selector/delete

  9. Secure the right selector/delete with the stainless steel set screw

  10. Assemble the upper and lower receivers of the gun and insert the pin

  11. Point the weapon into a safe area and check the operation of the firearm

PreviousTrigger shoeNextMagazine release

Last updated